File Editor
Directories:
.. (Back)
images
Files:
actions.php
file_actions.php
get_site_data.php
index.php
readme.txt
settings.php
verify.php
wpc_functions.php
wpc_soft_pclzip.php
wpcentral.php
wpcentral_lang.php
Create New File
Create
Edit File: wpc_soft_pclzip.php
<?php // Copyright Softaculous Ltd. if (!defined('ABSPATH')){ exit; } if(!class_exists('PclZip')){ include_once(ABSPATH.'wp-admin/includes/class-pclzip.php'); } class softpclzip extends PclZip{ function __construct($p_zipname){ return parent::PclZip($p_zipname); } function restore_list(){ $v_result=1; // ----- Reset the error handler $this->privErrorReset(); // ----- Check archive if (!$this->privCheckFormat()) { return(0); } // ----- Call the extracting fct $p_list = array(); // ----- Magic quotes trick $this->privDisableMagicQuotes(); // ----- Open the zip file if (($this->zip_fd = @fopen($this->zipname, 'rb')) == 0) { // ----- Magic quotes trick $this->privSwapBackMagicQuotes(); // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open archive \''.$this->zipname.'\' in binary read mode'); // ----- Return return PclZip::errorCode(); } // ----- Read the central directory informations if (($v_result = $this->restore_privReadEndCentralDir($p_list)) != 1) { $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Close the zip file $this->privCloseFd(); // ----- Magic quotes trick $this->privSwapBackMagicQuotes(); // ----- Return return $p_list; } function restore_privReadEndCentralDir(&$p_list){ $v_result=1; $p_central_dir = array(); // ----- Go to the end of the zip file $v_size = filesize($this->zipname); @fseek($this->zip_fd, $v_size); if (@ftell($this->zip_fd) != $v_size) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to go to the end of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- First try : look if this is an archive with no commentaries (most of the time) // in this case the end of central dir is at 22 bytes of the file end $v_found = 0; if ($v_size > 26) { @fseek($this->zip_fd, $v_size-22); if (($v_pos = @ftell($this->zip_fd)) != ($v_size-22)) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- Read for bytes $v_binary_data = @fread($this->zip_fd, 4); $v_data = @unpack('Vid', $v_binary_data); // ----- Check signature if ($v_data['id'] == 0x06054b50) { $v_found = 1; } $v_pos = ftell($this->zip_fd); } // ----- Go back to the maximum possible size of the Central Dir End Record if (!$v_found) { $v_maximum_size = 65557; // 0xFFFF + 22; if ($v_maximum_size > $v_size) $v_maximum_size = $v_size; @fseek($this->zip_fd, $v_size-$v_maximum_size); if (@ftell($this->zip_fd) != ($v_size-$v_maximum_size)) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- Read byte per byte in order to find the signature $v_pos = ftell($this->zip_fd); $v_bytes = 0x00000000; while ($v_pos < $v_size) { // ----- Read a byte $v_byte = @fread($this->zip_fd, 1); // ----- Add the byte //$v_bytes = ($v_bytes << 8) | Ord($v_byte); // Note we mask the old value down such that once shifted we can never end up with more than a 32bit number // Otherwise on systems where we have 64bit integers the check below for the magic number will fail. $v_bytes = ( ($v_bytes & 0xFFFFFF) << 8) | Ord($v_byte); // ----- Compare the bytes if ($v_bytes == 0x504b0506) { $v_pos++; break; } $v_pos++; } // ----- Look if not found end of central dir if ($v_pos == $v_size) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Unable to find End of Central Dir Record signature"); // ----- Return return PclZip::errorCode(); } } // ----- Read the first 18 bytes of the header $v_binary_data = fread($this->zip_fd, 18); // ----- Look for invalid block size if (strlen($v_binary_data) != 18) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Invalid End of Central Dir Record size : ".strlen($v_binary_data)); // ----- Return return PclZip::errorCode(); } // ----- Extract the values $v_data = unpack('vdisk/vdisk_start/vdisk_entries/ventries/Vsize/Voffset/vcomment_size', $v_binary_data); // ----- Check the global size if (($v_pos + $v_data['comment_size'] + 18) != $v_size) { // ----- Removed in release 2.2 see readme file // The check of the file size is a little too strict. // Some bugs where found when a zip is encrypted/decrypted with 'crypt'. // While decrypted, zip has training 0 bytes if (0) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'The central dir is not at the end of the archive.' .' Some trailing bytes exists after the archive.'); // ----- Return return PclZip::errorCode(); } } // ----- Get comment if ($v_data['comment_size'] != 0) { $p_central_dir['comment'] = fread($this->zip_fd, $v_data['comment_size']); } else $p_central_dir['comment'] = ''; $p_central_dir['entries'] = $v_data['entries']; $p_central_dir['disk_entries'] = $v_data['disk_entries']; $p_central_dir['offset'] = $v_data['offset']; $p_central_dir['size'] = $v_data['size']; $p_central_dir['disk'] = $v_data['disk']; $p_central_dir['disk_start'] = $v_data['disk_start']; //r_print($p_central_dir); // ----- Read next Central dir entry @rewind($this->zip_fd); if (@fseek($this->zip_fd, $p_central_dir['offset'])){ return $v_result; // Return the original result } //$start = microtime_float(); for($i=1; $i<=200000; $i++){ $binary_data = @fread($this->zip_fd, 4); $_data = unpack('Vid', $binary_data); if ($_data['id'] != 0x02014b50){ if($_data['id'] == 0x06054b50){ $total = $i - 1; } break; } fread($this->zip_fd, 24); $binary_data = fread($this->zip_fd, 6); $_header = unpack('vfilename_len/vextra_len/vcomment_len', $binary_data); fread($this->zip_fd, 12); // ----- Get filename if ($_header['filename_len'] != 0){ $filename = fread($this->zip_fd, $_header['filename_len']); $vv = trim(trim($filename), '/'); if(substr_count($vv, '/') || empty($vv)){ }else{ $p_list[] = $vv; } } // ----- Get extra if ($_header['extra_len'] != 0) fread($this->zip_fd, $_header['extra_len']); // ----- Get comment if ($_header['comment_len'] != 0) fread($this->zip_fd, $_header['comment_len']); unset($_header); }// End of for loop if(!empty($total)){ $p_central_dir['entries'] = $total; $p_central_dir['disk_entries'] = $total; } // TBC //for(reset($p_central_dir); $key = key($p_central_dir); next($p_central_dir)) { //} // ----- Return return $v_result; } // Less memory intensive EXTRACT function _extract() { $v_result=1; // ----- Reset the error handler $this->privErrorReset(); // ----- Check archive if (!$this->privCheckFormat()) { return(0); } // ----- Set default values $v_options = array(); // $v_path = "./"; $v_path = ''; $v_remove_path = ""; $v_remove_all_path = false; // ----- Look for variable options arguments $v_size = func_num_args(); // ----- Default values for option $v_options[PCLZIP_OPT_EXTRACT_AS_STRING] = FALSE; // ----- Look for arguments if ($v_size > 0) { // ----- Get the arguments $v_arg_list = func_get_args(); // ----- Look for first arg if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) { // ----- Parse the options $v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array (PCLZIP_OPT_PATH => 'optional', PCLZIP_OPT_REMOVE_PATH => 'optional', PCLZIP_OPT_REMOVE_ALL_PATH => 'optional', PCLZIP_OPT_ADD_PATH => 'optional', PCLZIP_CB_PRE_EXTRACT => 'optional', PCLZIP_CB_POST_EXTRACT => 'optional', PCLZIP_OPT_SET_CHMOD => 'optional', PCLZIP_OPT_BY_NAME => 'optional', PCLZIP_OPT_BY_EREG => 'optional', PCLZIP_OPT_BY_PREG => 'optional', PCLZIP_OPT_BY_INDEX => 'optional', PCLZIP_OPT_EXTRACT_AS_STRING => 'optional', PCLZIP_OPT_EXTRACT_IN_OUTPUT => 'optional', PCLZIP_OPT_REPLACE_NEWER => 'optional' ,PCLZIP_OPT_STOP_ON_ERROR => 'optional' ,PCLZIP_OPT_EXTRACT_DIR_RESTRICTION => 'optional', PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional', PCLZIP_OPT_TEMP_FILE_ON => 'optional', PCLZIP_OPT_TEMP_FILE_OFF => 'optional' )); if ($v_result != 1) { return 0; } // ----- Set the arguments if (isset($v_options[PCLZIP_OPT_PATH])) { $v_path = $v_options[PCLZIP_OPT_PATH]; } if (isset($v_options[PCLZIP_OPT_REMOVE_PATH])) { $v_remove_path = $v_options[PCLZIP_OPT_REMOVE_PATH]; } if (isset($v_options[PCLZIP_OPT_REMOVE_ALL_PATH])) { $v_remove_all_path = $v_options[PCLZIP_OPT_REMOVE_ALL_PATH]; } if (isset($v_options[PCLZIP_OPT_ADD_PATH])) { // ----- Check for '/' in last path char if ((strlen($v_path) > 0) && (substr($v_path, -1) != '/')) { $v_path .= '/'; } $v_path .= $v_options[PCLZIP_OPT_ADD_PATH]; } } // ----- Look for 2 args // Here we need to support the first historic synopsis of the // method. else { // ----- Get the first argument $v_path = $v_arg_list[0]; // ----- Look for the optional second argument if ($v_size == 2) { $v_remove_path = $v_arg_list[1]; } else if ($v_size > 2) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments"); // ----- Return return 0; } } } // ----- Look for default option values $this->privOptionDefaultThreshold($v_options); // ----- Trace // ----- Call the extracting fct $p_list = array(); $v_result = $this->_privExtractByRule($p_list, $v_path, $v_remove_path, $v_remove_all_path, $v_options); if ($v_result < 1) { unset($p_list); return(0); } // ----- Return return $p_list; } function _privExtractByRule(&$p_file_list, $p_path, $p_remove_path, $p_remove_all_path, &$p_options) { $v_result=1; // ----- Magic quotes trick $this->privDisableMagicQuotes(); // ----- Check the path if ( ($p_path == "") || ( (substr($p_path, 0, 1) != "/") && (substr($p_path, 0, 3) != "../") && (substr($p_path,1,2)!=":/"))) $p_path = "./".$p_path; // ----- Reduce the path last (and duplicated) '/' if (($p_path != "./") && ($p_path != "/")) { // ----- Look for the path end '/' while (substr($p_path, -1) == "/") { $p_path = substr($p_path, 0, strlen($p_path)-1); } } // ----- Look for path to remove format (should end by /) if (($p_remove_path != "") && (substr($p_remove_path, -1) != '/')) { $p_remove_path .= '/'; } $p_remove_path_size = strlen($p_remove_path); // ----- Open the zip file if (($v_result = $this->privOpenFd('rb')) != 1) { $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Read the central directory informations $v_central_dir = array(); if (($v_result = $this->_privReadEndCentralDir($v_central_dir)) != 1) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Start at beginning of Central Dir $v_pos_entry = $v_central_dir['offset']; // ----- Read each entry $j_start = 0; for ($i=0, $v_nb_extracted=0; $i<$v_central_dir['entries']; $i++) { // ----- Read next Central dir entry @rewind($this->zip_fd); if (@fseek($this->zip_fd, $v_pos_entry)) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size'); // ----- Return return PclZip::errorCode(); } // ----- Read the file header $v_header = array(); if (($v_result = $this->privReadCentralFileHeader($v_header)) != 1) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Store the index $v_header['index'] = $i; // ----- Store the file position $v_pos_entry = ftell($this->zip_fd); // ----- Look for the specific extract rules $v_extract = false; // ----- Look for extract by name rule if ( (isset($p_options[PCLZIP_OPT_BY_NAME])) && ($p_options[PCLZIP_OPT_BY_NAME] != 0)) { // ----- Look if the filename is in the list for ($j=0; ($j<sizeof($p_options[PCLZIP_OPT_BY_NAME])) && (!$v_extract); $j++) { // ----- Look for a directory if (substr($p_options[PCLZIP_OPT_BY_NAME][$j], -1) == "/") { // ----- Look if the directory is in the filename path if ( (strlen($v_header['stored_filename']) > strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) && (substr($v_header['stored_filename'], 0, strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) == $p_options[PCLZIP_OPT_BY_NAME][$j])) { $v_extract = true; } } // ----- Look for a filename elseif ($v_header['stored_filename'] == $p_options[PCLZIP_OPT_BY_NAME][$j]) { $v_extract = true; } } } // ----- Look for extract by ereg rule // ereg() is deprecated with PHP 5.3 /* else if ( (isset($p_options[PCLZIP_OPT_BY_EREG])) && ($p_options[PCLZIP_OPT_BY_EREG] != "")) { if (ereg($p_options[PCLZIP_OPT_BY_EREG], $v_header['stored_filename'])) { $v_extract = true; } } */ // ----- Look for extract by preg rule else if ( (isset($p_options[PCLZIP_OPT_BY_PREG])) && ($p_options[PCLZIP_OPT_BY_PREG] != "")) { if (preg_match($p_options[PCLZIP_OPT_BY_PREG], $v_header['stored_filename'])) { $v_extract = true; } } // ----- Look for extract by index rule else if ( (isset($p_options[PCLZIP_OPT_BY_INDEX])) && ($p_options[PCLZIP_OPT_BY_INDEX] != 0)) { // ----- Look if the index is in the list for ($j=$j_start; ($j<sizeof($p_options[PCLZIP_OPT_BY_INDEX])) && (!$v_extract); $j++) { if (($i>=$p_options[PCLZIP_OPT_BY_INDEX][$j]['start']) && ($i<=$p_options[PCLZIP_OPT_BY_INDEX][$j]['end'])) { $v_extract = true; } if ($i>=$p_options[PCLZIP_OPT_BY_INDEX][$j]['end']) { $j_start = $j+1; } if ($p_options[PCLZIP_OPT_BY_INDEX][$j]['start']>$i) { break; } } } // ----- Look for no rule, which means extract all the archive else { $v_extract = true; } // ----- Check compression method if ( ($v_extract) && ( ($v_header['compression'] != 8) && ($v_header['compression'] != 0))) { $v_header['status'] = 'unsupported_compression'; // ----- Look for PCLZIP_OPT_STOP_ON_ERROR if ( (isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR]===true)) { $this->privSwapBackMagicQuotes(); PclZip::privErrorLog(PCLZIP_ERR_UNSUPPORTED_COMPRESSION, "Filename '".$v_header['stored_filename']."' is " ."compressed by an unsupported compression " ."method (".$v_header['compression'].") "); return PclZip::errorCode(); } } // ----- Check encrypted files if (($v_extract) && (($v_header['flag'] & 1) == 1)) { $v_header['status'] = 'unsupported_encryption'; // ----- Look for PCLZIP_OPT_STOP_ON_ERROR if ( (isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR]===true)) { $this->privSwapBackMagicQuotes(); PclZip::privErrorLog(PCLZIP_ERR_UNSUPPORTED_ENCRYPTION, "Unsupported encryption for " ." filename '".$v_header['stored_filename'] ."'"); return PclZip::errorCode(); } } // ----- Look for real extraction if (($v_extract) && ($v_header['status'] != 'ok')) { $v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++]); if ($v_result != 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } $v_extract = false; } // ----- Look for real extraction if ($v_extract) { // ----- Go to the file position @rewind($this->zip_fd); if (@fseek($this->zip_fd, $v_header['offset'])) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size'); // ----- Return return PclZip::errorCode(); } // ----- Look for extraction as string if ($p_options[PCLZIP_OPT_EXTRACT_AS_STRING]) { $v_string = ''; // ----- Extracting the file $v_result1 = $this->privExtractFileAsString($v_header, $v_string, $p_options); if ($v_result1 < 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result1; } // ----- Get the only interesting attributes if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted])) != 1) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Set the file content $p_file_list[$v_nb_extracted]['content'] = $v_string; // ----- Next extracted file $v_nb_extracted++; // ----- Look for user callback abort if ($v_result1 == 2) { break; } } // ----- Look for extraction in standard output elseif ( (isset($p_options[PCLZIP_OPT_EXTRACT_IN_OUTPUT])) && ($p_options[PCLZIP_OPT_EXTRACT_IN_OUTPUT])) { // ----- Extracting the file in standard output $v_result1 = $this->privExtractFileInOutput($v_header, $p_options); if ($v_result1 < 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result1; } // ----- Get the only interesting attributes if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++])) != 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Look for user callback abort if ($v_result1 == 2) { break; } } // ----- Look for normal extraction else { // ----- Extracting the file $v_result1 = $this->privExtractFile($v_header, $p_path, $p_remove_path, $p_remove_all_path, $p_options); if ($v_result1 < 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result1; } $v_nb_extracted++; //echo memory_get_usage().' - '.$v_nb_extracted.' - '.$v_header['filename']."\n"; // ----- Get the only interesting attributes /*if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++])) != 1) { // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; }*/ // ----- Look for user callback abort if ($v_result1 == 2) { break; } } } } // ----- Close the zip file $this->privCloseFd(); $this->privSwapBackMagicQuotes(); // ----- Return return $v_result; } function _privReadEndCentralDir(&$p_central_dir) { $v_result=1; // ----- Go to the end of the zip file $v_size = filesize($this->zipname); @fseek($this->zip_fd, $v_size); if (@ftell($this->zip_fd) != $v_size) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to go to the end of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- First try : look if this is an archive with no commentaries (most of the time) // in this case the end of central dir is at 22 bytes of the file end $v_found = 0; if ($v_size > 26) { @fseek($this->zip_fd, $v_size-22); if (($v_pos = @ftell($this->zip_fd)) != ($v_size-22)) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- Read for bytes $v_binary_data = @fread($this->zip_fd, 4); $v_data = @unpack('Vid', $v_binary_data); // ----- Check signature if ($v_data['id'] == 0x06054b50) { $v_found = 1; } $v_pos = ftell($this->zip_fd); } // ----- Go back to the maximum possible size of the Central Dir End Record if (!$v_found) { $v_maximum_size = 65557; // 0xFFFF + 22; if ($v_maximum_size > $v_size) $v_maximum_size = $v_size; @fseek($this->zip_fd, $v_size-$v_maximum_size); if (@ftell($this->zip_fd) != ($v_size-$v_maximum_size)) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive \''.$this->zipname.'\''); // ----- Return return PclZip::errorCode(); } // ----- Read byte per byte in order to find the signature $v_pos = ftell($this->zip_fd); $v_bytes = 0x00000000; while ($v_pos < $v_size) { // ----- Read a byte $v_byte = @fread($this->zip_fd, 1); // ----- Add the byte //$v_bytes = ($v_bytes << 8) | Ord($v_byte); // Note we mask the old value down such that once shifted we can never end up with more than a 32bit number // Otherwise on systems where we have 64bit integers the check below for the magic number will fail. $v_bytes = ( ($v_bytes & 0xFFFFFF) << 8) | Ord($v_byte); // ----- Compare the bytes if ($v_bytes == 0x504b0506) { $v_pos++; break; } $v_pos++; } // ----- Look if not found end of central dir if ($v_pos == $v_size) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Unable to find End of Central Dir Record signature"); // ----- Return return PclZip::errorCode(); } } // ----- Read the first 18 bytes of the header $v_binary_data = fread($this->zip_fd, 18); // ----- Look for invalid block size if (strlen($v_binary_data) != 18) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Invalid End of Central Dir Record size : ".strlen($v_binary_data)); // ----- Return return PclZip::errorCode(); } // ----- Extract the values $v_data = unpack('vdisk/vdisk_start/vdisk_entries/ventries/Vsize/Voffset/vcomment_size', $v_binary_data); // ----- Check the global size if (($v_pos + $v_data['comment_size'] + 18) != $v_size) { // ----- Removed in release 2.2 see readme file // The check of the file size is a little too strict. // Some bugs where found when a zip is encrypted/decrypted with 'crypt'. // While decrypted, zip has training 0 bytes if (0) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'The central dir is not at the end of the archive.' .' Some trailing bytes exists after the archive.'); // ----- Return return PclZip::errorCode(); } } // ----- Get comment if ($v_data['comment_size'] != 0) { $p_central_dir['comment'] = fread($this->zip_fd, $v_data['comment_size']); } else $p_central_dir['comment'] = ''; $p_central_dir['entries'] = $v_data['entries']; $p_central_dir['disk_entries'] = $v_data['disk_entries']; $p_central_dir['offset'] = $v_data['offset']; $p_central_dir['size'] = $v_data['size']; $p_central_dir['disk'] = $v_data['disk']; $p_central_dir['disk_start'] = $v_data['disk_start']; //r_print($p_central_dir); // ----- Read next Central dir entry @rewind($this->zip_fd); if (@fseek($this->zip_fd, $p_central_dir['offset'])){ return $v_result; // Return the original result } //$start = microtime_float(); for($i=1; $i<=200000; $i++){ $binary_data = @fread($this->zip_fd, 4); $_data = unpack('Vid', $binary_data); if ($_data['id'] != 0x02014b50){ if($_data['id'] == 0x06054b50){ $total = $i - 1; } break; } fread($this->zip_fd, 24); $binary_data = fread($this->zip_fd, 6); $_header = unpack('vfilename_len/vextra_len/vcomment_len', $binary_data); fread($this->zip_fd, 12); // ----- Get filename if ($_header['filename_len'] != 0) fread($this->zip_fd, $_header['filename_len']); // ----- Get extra if ($_header['extra_len'] != 0) fread($this->zip_fd, $_header['extra_len']); // ----- Get comment if ($_header['comment_len'] != 0) fread($this->zip_fd, $_header['comment_len']); unset($_header); }// End of for loop if(!empty($total)){ $p_central_dir['entries'] = $total; $p_central_dir['disk_entries'] = $total; } //echo (microtime_float() - $start)."\n"; //r_print($p_central_dir); // TBC //for(reset($p_central_dir); $key = key($p_central_dir); next($p_central_dir)) { //} // ----- Return return $v_result; } function _add($p_filelist) { $v_result=1; // ----- Reset the error handler $this->privErrorReset(); // ----- Set default values $v_options = array(); $v_options[PCLZIP_OPT_NO_COMPRESSION] = FALSE; // ----- Look for variable options arguments $v_size = func_num_args(); // ----- Look for arguments if ($v_size > 1) { // ----- Get the arguments $v_arg_list = func_get_args(); // ----- Remove form the options list the first argument array_shift($v_arg_list); $v_size--; // ----- Look for first arg if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) { // ----- Parse the options $v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array (PCLZIP_OPT_REMOVE_PATH => 'optional', PCLZIP_OPT_REMOVE_ALL_PATH => 'optional', PCLZIP_OPT_ADD_PATH => 'optional', PCLZIP_CB_PRE_ADD => 'optional', PCLZIP_CB_POST_ADD => 'optional', PCLZIP_OPT_NO_COMPRESSION => 'optional', PCLZIP_OPT_COMMENT => 'optional', PCLZIP_OPT_ADD_COMMENT => 'optional', PCLZIP_OPT_PREPEND_COMMENT => 'optional', PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional', PCLZIP_OPT_TEMP_FILE_ON => 'optional', PCLZIP_OPT_TEMP_FILE_OFF => 'optional' //, PCLZIP_OPT_CRYPT => 'optional' )); if ($v_result != 1) { return 0; } } // ----- Look for 2 args // Here we need to support the first historic synopsis of the // method. else { // ----- Get the first argument $v_options[PCLZIP_OPT_ADD_PATH] = $v_add_path = $v_arg_list[0]; // ----- Look for the optional second argument if ($v_size == 2) { $v_options[PCLZIP_OPT_REMOVE_PATH] = $v_arg_list[1]; } else if ($v_size > 2) { // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments"); // ----- Return return 0; } } } // ----- Look for default option values $this->privOptionDefaultThreshold($v_options); // ----- Init $v_string_list = array(); $v_att_list = array(); $v_filedescr_list = array(); $p_result_list = array(); // ----- Look if the $p_filelist is really an array if (is_array($p_filelist)) { // ----- Look if the first element is also an array // This will mean that this is a file description entry if (isset($p_filelist[0]) && is_array($p_filelist[0])) { $v_att_list = $p_filelist; } // ----- The list is a list of string names else { $v_string_list = $p_filelist; } } // ----- Look if the $p_filelist is a string else if (is_string($p_filelist)) { // ----- Create a list from the string $v_string_list = explode(PCLZIP_SEPARATOR, $p_filelist); } // ----- Invalid variable type for $p_filelist else { PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid variable type '".gettype($p_filelist)."' for p_filelist"); return 0; } // ----- Reformat the string list if (sizeof($v_string_list) != 0) { foreach ($v_string_list as $v_string) { $v_att_list[][PCLZIP_ATT_FILE_NAME] = $v_string; } } // ----- For each file in the list check the attributes $v_supported_attributes = array ( PCLZIP_ATT_FILE_NAME => 'mandatory' ,PCLZIP_ATT_FILE_NEW_SHORT_NAME => 'optional' ,PCLZIP_ATT_FILE_NEW_FULL_NAME => 'optional' ,PCLZIP_ATT_FILE_MTIME => 'optional' ,PCLZIP_ATT_FILE_CONTENT => 'optional' ,PCLZIP_ATT_FILE_COMMENT => 'optional' ); foreach ($v_att_list as $v_entry) { $v_result = $this->privFileDescrParseAtt($v_entry, $v_filedescr_list[], $v_options, $v_supported_attributes); if ($v_result != 1) { return 0; } } /*// ----- Expand the filelist (expand directories) $v_result = $this->privFileDescrExpand($v_filedescr_list, $v_options); if ($v_result != 1) { return 0; }*/ // ----- Call the create fct $v_result = $this->_privAdd($v_filedescr_list, $p_result_list, $v_options); if ($v_result != 1) { return 0; } // ----- Return return $p_result_list; } function _privAdd($p_filedescr_list, &$p_result_list, &$p_options) { $v_result=1; $v_list_detail = array(); // ----- Look if the archive exists or is empty if ((!is_file($this->zipname)) || (filesize($this->zipname) == 0)) { $v_result = $this->privFileDescrExpand($p_filedescr_list, $p_options); if ($v_result != 1) { return 0; } // ----- Do a create $v_result = $this->privCreate($p_filedescr_list, $p_result_list, $p_options); // ----- Return return $v_result; } // ----- Magic quotes trick $this->privDisableMagicQuotes(); // ----- Open the zip file if (($v_result=$this->privOpenFd('rb')) != 1) { // ----- Magic quotes trick $this->privSwapBackMagicQuotes(); // ----- Return return $v_result; } // ----- Read the central directory informations $v_central_dir = array(); if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); return $v_result; } // ----- Go to beginning of File @rewind($this->zip_fd); // ----- Creates a temporay file $v_zip_temp_name = PCLZIP_TEMPORARY_DIR.uniqid('pclzip-').'.tmp'; // ----- Open the temporary file in write mode if (($v_zip_temp_fd = @fopen($v_zip_temp_name, 'wb')) == 0) { $this->privCloseFd(); $this->privSwapBackMagicQuotes(); PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file \''.$v_zip_temp_name.'\' in binary write mode'); // ----- Return return PclZip::errorCode(); } // ----- Copy the files from the archive to the temporary file // TBC : Here I should better append the file and go back to erase the central dir $v_size = $v_central_dir['offset']; while ($v_size != 0) { $v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE); $v_buffer = fread($this->zip_fd, $v_read_size); @fwrite($v_zip_temp_fd, $v_buffer, $v_read_size); $v_size -= $v_read_size; } // ----- Swap the file descriptor // Here is a trick : I swap the temporary fd with the zip fd, in order to use // the following methods on the temporary fil and not the real archive $v_swap = $this->zip_fd; $this->zip_fd = $v_zip_temp_fd; $v_zip_temp_fd = $v_swap; global $tempheader; $tempheader = ''; $tempheaderfile = PCLZIP_TEMPORARY_DIR.uniqid('softaculous').'.tmp'; if(($tempheader = @fopen($tempheaderfile, 'wb')) == 0){ fclose($v_zip_temp_fd); $this->privCloseFd(); @unlink($v_zip_temp_name); $this->privSwapBackMagicQuotes(); PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file \''.$tempheaderfile.'\' in binary write mode'); return 88888; } //echo 'privAddList - '.memory_get_usage()."\n"; // ----- Add the files if (($v_result = $this->_privAddFileList($p_filedescr_list, $p_result_list, $p_options)) != 1) { fclose($v_zip_temp_fd); $this->privCloseFd(); @unlink($v_zip_temp_name); $this->privSwapBackMagicQuotes(); // ----- Return return $v_result; } //echo 'privAddList END - '.memory_get_usage()."\n"; // ----- Store the offset of the central dir $v_offset = @ftell($this->zip_fd); //echo '1 - '.memory_get_usage()."\n"; // ----- Copy the block of file headers from the old archive $v_size = $v_central_dir['size']; while ($v_size != 0) { $v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE); $v_buffer = @fread($v_zip_temp_fd, $v_read_size); @fwrite($this->zip_fd, $v_buffer, $v_read_size); $v_size -= $v_read_size; } //echo '2 - '.memory_get_usage()."\n"; // ----- Create the Central Dir files header $v_count = $p_result_list; // Append the Temporary file we created. @fclose($tempheader); if(($tempfd = @fopen($tempheaderfile, "rb")) == 0){ fclose($v_zip_temp_fd); $this->privCloseFd(); @unlink($v_zip_temp_name); $this->privSwapBackMagicQuotes(); return 88888; } $t_size = filesize($tempheaderfile); while ($t_size != 0) { $t_read_size = ($t_size < PCLZIP_READ_BLOCK_SIZE ? $t_size : PCLZIP_READ_BLOCK_SIZE); $t_buffer = @fread($tempfd, $t_read_size); @fwrite($this->zip_fd, $t_buffer, $t_read_size); $t_size -= $t_read_size; } @fclose($tempfd); @unlink($tempheaderfile); //echo '3 - '.memory_get_usage()."\n"; // ----- Zip file comment $v_comment = $v_central_dir['comment']; if (isset($p_options[PCLZIP_OPT_COMMENT])) { $v_comment = $p_options[PCLZIP_OPT_COMMENT]; } if (isset($p_options[PCLZIP_OPT_ADD_COMMENT])) { $v_comment = $v_comment.$p_options[PCLZIP_OPT_ADD_COMMENT]; } if (isset($p_options[PCLZIP_OPT_PREPEND_COMMENT])) { $v_comment = $p_options[PCLZIP_OPT_PREPEND_COMMENT].$v_comment; } //echo '4 - '.memory_get_usage()."\n"; // ----- Calculate the size of the central header $v_size = @ftell($this->zip_fd)-$v_offset; // ----- Create the central dir footer if (($v_result = $this->privWriteCentralHeader($v_count+$v_central_dir['entries'], $v_size, $v_offset, $v_comment)) != 1) { // ----- Reset the file list $this->privSwapBackMagicQuotes(); // ----- Return return $v_result; } //echo '5 - '.memory_get_usage()."\n"; // ----- Swap back the file descriptor $v_swap = $this->zip_fd; $this->zip_fd = $v_zip_temp_fd; $v_zip_temp_fd = $v_swap; //echo '6 - '.memory_get_usage()."\n"; // ----- Close $this->privCloseFd(); //echo '7 - '.memory_get_usage()."\n"; // ----- Close the temporary file @fclose($v_zip_temp_fd); // ----- Magic quotes trick $this->privSwapBackMagicQuotes(); //echo '8 - '.memory_get_usage()."\n"; // ----- Delete the zip file // TBC : I should test the result ... @unlink($this->zipname); // ----- Rename the temporary file // TBC : I should test the result ... //@rename($v_zip_temp_name, $this->zipname); PclZipUtilRename($v_zip_temp_name, $this->zipname); //echo '9 - '.memory_get_usage()."\n"; // ----- Return return $v_result; } function _privAddFileList($p_filedescr_list, &$p_result_list, &$p_options) { $v_result=1; global $_soft_result_list, $_soft_nb; $_soft_result_list = array(); $_soft_nb = 0; $v_result = $this->_privFileDescrExpand($p_filedescr_list, $p_options); if ($v_result != 1) { return 0; } $p_result_list = $_soft_nb; // ----- Return return $v_result; } function _privFileDescrExpand(&$p_filedescr_list, &$p_options) { global $error, $l; $v_result=1; // ----- Create a result list $v_result_list = array(); // r_print($p_filedescr_list); // ----- Look each entry for ($i=0; $i<sizeof($p_filedescr_list); $i++) { // ----- Get filedescr $v_descr = $p_filedescr_list[$i]; // ----- Reduce the filename $v_descr['filename'] = PclZipUtilTranslateWinPath($v_descr['filename'], false); $v_descr['filename'] = PclZipUtilPathReduction($v_descr['filename']); // ----- Look for real file or folder if (file_exists($v_descr['filename'])) { if (@is_file($v_descr['filename'])) { $v_descr['type'] = 'file'; } else if (@is_dir($v_descr['filename'])) { $v_descr['type'] = 'folder'; } else if (@is_link($v_descr['filename'])) { // skip continue; } else { // skip continue; } } // ----- Look for string added as file else if (isset($v_descr['content'])) { $v_descr['type'] = 'virtual_file'; } // ----- Missing file else { $error['read'] = lang_vars($l['could_not_read'], array($v_descr['filename'])); // ----- Error log PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "File '".$v_descr['filename']."' does not exist"); // ----- Return return PclZip::errorCode(); } // ----- Calculate the stored filename $this->privCalculateStoredFilename($v_descr, $p_options); //r_print($v_descr); /////////////////////////////////////// // Softaculous Change // We add the files here itself /////////////////////////////////////// global $_soft_result_list, $_soft_nb; $_file = $v_descr; // ----- Format the filename $_file['filename'] = PclZipUtilTranslateWinPath($_file['filename'], false); // ----- Skip empty file names // TBC : Can this be possible ? not checked in DescrParseAtt ? if ($_file['filename'] == "") { continue; } // ----- Check the filename if ( ($_file['type'] != 'virtual_file') && (!file_exists($_file['filename']))) { PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "File '".$_file['filename']."' does not exist"); return PclZip::errorCode(); } // ----- Look if it is a file or a dir with no all path remove option // or a dir with all its path removed // if ( (is_file($p_filedescr_list[$j]['filename'])) // || ( is_dir($p_filedescr_list[$j]['filename']) if ( ($_file['type'] == 'file') || ($_file['type'] == 'virtual_file') || ( ($_file['type'] == 'folder') && ( !isset($p_options[PCLZIP_OPT_REMOVE_ALL_PATH]) || !$p_options[PCLZIP_OPT_REMOVE_ALL_PATH])) ) { $v_header = array(); // ----- Add the file $v_result = $this->privAddFile($_file, $v_header, $p_options); if ($v_result != 1) { return $v_result; } if ($v_header['status'] == 'ok') { if (($v_result = $this->_privWriteCentralFileHeader($v_header)) != 1) { // ----- Return return $v_result; } $_soft_nb++; } unset($v_header); // ----- Store the file infos //$_soft_result_list[$_soft_nb++] = $v_header; } //////////////////////////////////////// // End of Adding the Files //////////////////////////////////////// // ----- Add the descriptor in result list $v_result_list[sizeof($v_result_list)] = $v_descr; //r_print($v_descr); // ----- Look for folder if ($v_descr['type'] == 'folder') { // ----- List of items in folder $v_dirlist_descr = array(); $v_dirlist_nb = 0; if (($v_folder_handler = @opendir($v_descr['filename']))) { while (($v_item_handler = @readdir($v_folder_handler)) !== false) { // ----- Skip '.' and '..' if (($v_item_handler == '.') || ($v_item_handler == '..')) { continue; } // ----- Compose the full filename $v_dirlist_descr[$v_dirlist_nb]['filename'] = $v_descr['filename'].'/'.$v_item_handler; // ----- Look for different stored filename // Because the name of the folder was changed, the name of the // files/sub-folders also change if (($v_descr['stored_filename'] != $v_descr['filename']) && (!isset($p_options[PCLZIP_OPT_REMOVE_ALL_PATH]))) { if ($v_descr['stored_filename'] != '') { $v_dirlist_descr[$v_dirlist_nb]['new_full_name'] = $v_descr['stored_filename'].'/'.$v_item_handler; } else { $v_dirlist_descr[$v_dirlist_nb]['new_full_name'] = $v_item_handler; } } $v_dirlist_nb++; //echo $v_dirlist_nb."\n"; } @closedir($v_folder_handler); } else { // TBC : unable to open folder in read mode } //r_print($v_dirlist_descr); // ----- Expand each element of the list if ($v_dirlist_nb != 0) { // ----- Expand if (($v_result = $this->_privFileDescrExpand($v_dirlist_descr, $p_options)) != 1) { return $v_result; } // ----- Concat the resulting list //$v_result_list = array_merge($v_result_list, $v_dirlist_descr); } else { } // ----- Free local array unset($v_dirlist_descr); } } // ----- Get the result list //$p_filedescr_list = $v_result_list; // ----- Return return $v_result; } function _privWriteCentralFileHeader(&$p_header) { $v_result=1; global $tempheader; // TBC //for(reset($p_header); $key = key($p_header); next($p_header)) { //} // ----- Transform UNIX mtime to DOS format mdate/mtime $v_date = getdate($p_header['mtime']); $v_mtime = ($v_date['hours']<<11) + ($v_date['minutes']<<5) + $v_date['seconds']/2; $v_mdate = (($v_date['year']-1980)<<9) + ($v_date['mon']<<5) + $v_date['mday']; // ----- Packed data $v_binary_data = pack("VvvvvvvVVVvvvvvVV", 0x02014b50, $p_header['version'], $p_header['version_extracted'], $p_header['flag'], $p_header['compression'], $v_mtime, $v_mdate, $p_header['crc'], $p_header['compressed_size'], $p_header['size'], strlen($p_header['stored_filename']), $p_header['extra_len'], $p_header['comment_len'], $p_header['disk'], $p_header['internal'], $p_header['external'], $p_header['offset']); // ----- Write the 42 bytes of the header in the zip file fputs($tempheader, $v_binary_data, 46); // ----- Write the variable fields if (strlen($p_header['stored_filename']) != 0) { fputs($tempheader, $p_header['stored_filename'], strlen($p_header['stored_filename'])); } if ($p_header['extra_len'] != 0) { fputs($tempheader, $p_header['extra'], $p_header['extra_len']); } if ($p_header['comment_len'] != 0) { fputs($tempheader, $p_header['comment'], $p_header['comment_len']); } // ----- Return return $v_result; } }
Save Changes
Rename File
Rename